piwik image

12" X 12" X 12" PYRO-BLOC Y MODULE ZR 10#

Modules

  • Manufacturer: Morgan Advanced Materials
  • Brand: Thermal Ceramics
  • DI Part #: RFMD10PB121212YZT
  • Manufacturer Part #: 35108910120200

Thermal Ceramics Pyro-Bloc® Mechanically Fixed Y Module, Application: For Annealing Furnaces, Heat Treating Furnaces, Process Heaters, Reformers, Ethylene Furnaces, Forge Furnaces, Steam Flood Units, Homogenizing Furnaces, incinerators, Color: White, Density: 10 kg/cu-m, Item Thickness: 12 in, Length: 12 in, Material: Zirconia Fiber, Shrinkage: 1.6% at 1200 deg C, 3% at 1400 deg C, Specific Heat: 1.13 kJ/kg at 1000 deg C, Temperature Rating: 1425 deg C, Width: 12 in

Application   : For Annealing Furnaces, Heat Treating Furnaces, Process Heaters, Reformers, Ethylene Furnaces, Forge Furnaces, Steam Flood Units, Homogenizing Furnaces, incinerators

Color   : White

Density   : 10 kg/cu-m

Item Name   : Y Module

Item Thickness   : 12 in

Length   : 12 in

Material   : Zirconia Fiber

Shrinkage   : 1.6% at 1200 deg C, 3% at 1400 deg C

Specific Heat   : 1.13 kJ/kg at 1000 deg C

Sub Brand   : Pyro-Bloc

Temperature Rating   : 1425 deg C

Type/Style   : Mechanically Fixed

Width   : 12 in

Pyro Bloc modules comprise two sections of Pyrolog slab in edge-grain orientation. These are held in position with two stainless steel tubes mounted transversely through the modules and remote from the hot face. In the Y module, the tubes are connected with a central, internal yoke which includes a stainless steel stud and aluminum extension tube. This version is installed directly onto a metal plate casing, without pre-welding, using the special Pyro Bloc stud gun. It offers the fastest installation rates of any currently available modules.

  • High uncompressed densities give low thermal conductivity
  • Lubricated fiber allows increased compression and tight joints
  • Hardening effect on first firing gives a tough hot face, resistant to mechanical damage and gas flow abrasion
  • Resistance to weathering permits limited outside application
  • Anchorage remote from the hot face protects steel work
  • Fast installation
  • All welds automatically torque tested
  • One step installation
  • Monolithic, edge grained ceramic fiber module
  • Center fire, one step weld system
  • pdf SDS https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/SDS 350.pdf
  • pdf Technical Data Sheet https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/RCF Modules.pdf