Thermal Ceramics Pyro-Bloc® Mechanically Fixed Y Module, Application: For Annealing Furnaces, Heat Treating Furnaces, Process Heaters, Reformers, Ethylene Furnaces, Forge Furnaces, Steam Flood Units, Homogenizing Furnaces, incinerators, Color: White, Density: 10 kg/cu-m, Item Thickness: 6 in, Length: 12 in, Material: Zirconia Fiber, Shrinkage: 1.6% at 1200 deg C, 3% at 1400 deg C, Specific Heat: 1.13 kJ/kg at 1000 deg C, Temperature Rating: 1425 deg C, Width: 12 in
Application : For Annealing Furnaces, Heat Treating Furnaces, Process Heaters, Reformers, Ethylene Furnaces, Forge Furnaces, Steam Flood Units, Homogenizing Furnaces, incinerators
Color : White
Density : 10 kg/cu-m
Item Name : Y Module
Item Thickness : 6 in
Length : 12 in
Material : Zirconia Fiber
Shrinkage : 1.6% at 1200 deg C, 3% at 1400 deg C
Specific Heat : 1.13 kJ/kg at 1000 deg C
Sub Brand : Pyro-Bloc
Temperature Rating : 1425 deg C
Type/Style : Mechanically Fixed
Width : 12 in
Pyro Bloc modules comprise two sections of Pyrolog slab in edge-grain orientation. These are held in position with two stainless steel tubes mounted transversely through the modules and remote from the hot face. In the Y module, the tubes are connected with a central, internal yoke which includes a stainless steel stud and aluminum extension tube. This version is installed directly onto a metal plate casing, without pre-welding, using the special Pyro Bloc stud gun. It offers the fastest installation rates of any currently available modules.
- High uncompressed densities give low thermal conductivity
- Lubricated fiber allows increased compression and tight joints
- Hardening effect on first firing gives a tough hot face, resistant to mechanical damage and gas flow abrasion
- Resistance to weathering permits limited outside application
- Anchorage remote from the hot face protects steel work
- Fast installation
- All welds automatically torque tested
- One step installation
- Monolithic, edge grained ceramic fiber module
- Center fire, one step weld system
SDS
