Goodtemp Perlite Block, Insulation Thickness: 2-1/2 in, Material: Perlite, Color: Pink, Length: 36 in, Width: 12 in, Density: 12 pcf, Application: For Insulating Piping, Vessels and Equipment in Continuous and Cyclic Operation, It is Especially Suited to New High Temperature Applications in Process Piping, Refractory Use and in Chemical Plants and Refineries and Hot Service Applications, Temperature Rating: 1200 deg F, Construction: Flat, Compressive Strength: 134 psi, Flexural Strength: 54 psi, Thermal Conductivity: 0.48 to 0.76 Btu-in/hr-sq-ft-deg F, Water Vapor Sorption: 1.3 %
Application : For Insulating Piping, Vessels and Equipment in Continuous and Cyclic Operation, It is Especially Suited to New High Temperature Applications in Process Piping, Refractory Use and in Chemical Plants and Refineries and Hot Service Applications
Color : Pink
Compressive Strength : 134 psi
Construction : Flat
Density : 12 pcf
Flexural Strength : 54 psi
Insulation Thickness : 2-1/2 in
Item Name : Perlite Block
Length : 36 in
Material : Perlite
Temperature Rating : 1200 deg F
Thermal Conductivity : 0.48 to 0.76 Btu-in/hr-sq-ft-deg F
Water Vapor Sorption : 1.3 %
Width : 12 in
Goodtemp is a high-temperature thermal insulation made of expanded perlite and sodium silicate reinforced with fibers to increase impact resistance. This thermal insulation is inhibited, asbestos-free high-temperature insulation. Being inherently inhibited, Goodtemp protects austenitic stainless steel piping and equipment from failure due to chloride stress corrosion cracking. Goodtemp also inhibits corrosion of other ferrous metals. The unique characteristic of bonding millions of vitrified air cells give abundant industrial applications to this inhibited high-temperature insulation.
- Moisture resistant - low absorption, corrosion guard, construction savings
- Fire resistant - does not act as wick, protects against actual fire damage
- Superior inhibition - provides corrosion inhibition for austenitic stainless steel and other ferrous metals
- Low shrinkage - less than 1% linear to 1200 deg F
- Corrosion protection - acid resistant, contains virtually no chloride, no lime
- No asbestos - no health hazards, meets OSHA requirements
- High strength and flexibility - easier installation, improved appearance, longer life
- Cost and time savings - full rating without double layers
- Easily identified, because its pink, you can easily spot asbestos-free GoodTemp
- Retains strength at high-temperatures - binder does not burn out, material will not flake, or discolor
Standards/Certifications: ASTM C610|ASTM C795|ASTM C871|ASTM C92|MIL-I-24244A|MIL-I-24244B|Nuclear Regulatory Commission Guide 1.36|UL 1709 Section 9
SDS
