POLYGUARD RG-2400 LT CORROSION CONTROL LOW TEMPERATURE 5 GALLONS

Polyguard RG-2400® LT Surface Conversion Compound, Size: 5 gal, Color: Blue, Density: 0.95 to 1.15, Application: For CUI, Piping Systems, Fittings, Valves, Tanks and Vessels, Special Features: Low-Temperature, Temperature Rating: 250 deg F, Container Type: Pail, Form: Liquid, Composition: 0.1 to 0.2% Titanium Dioxide, Specific Gravity: 0.95 to 1.05, Flash Point: 179.44 deg C, Shelf Life: 2 years, Coverage: 64 to 80 sq-ft/gal

Application   : For CUI, Piping Systems, Fittings, Valves, Tanks and Vessels

Color   : Blue

Composition   : 0.1 to 0.2% Titanium Dioxide

Container Type   : Pail

Coverage   : 64 to 80 sq-ft/gal

Density   : 0.95 to 1.15

Flash Point   : 179.44 deg C

Form   : Liquid

Item Name   : Surface Conversion Compound

Shelf Life   : 2 years

Size   : 5 gal

Special Features   : Low-Temperature

Specific Gravity   : 0.95 to 1.05

Sub Brand   : RG-2400 LT

Temperature Rating   : 250 deg F

RG-2400 LT is a surface conversion compound utilizing mineralization technology, or the science of minetics this compound replaces the corrosion process with a mineral formation on and into the metal creating a mineral barrier 50 to 200 angstroms deep into the metal surface. RG-2400 LT is a breakthrough for corrosion control and prevention on piping systems, tanks and vessels under insulation. It is a non-drying compound easily brush/spray applied to pipes, fittings, valves, tanks and vessels. It's non-skinning and non-sag properties make it a permanent solution. RG-2400 LT helps prevent corrosion from occurring, and it also helps stop existing corrosion from advancing. It requires minimal (wire brush off the scale) preparation. In addition, RG-2400 LT helps prevent stainless steel and copper stress crack corrosion under insulation. Installation thicknesses of 25 to 30 mil allow the unique formulation to heal any subsequent breach (mechanical damage) of the mineral barrier and the RG-2400 LT formula is so unique, that even if the vapor barrier is breached allowing moisture into the system, the RG-2400 LT will buffer any moisture that migrates through it to an elevated pH.

• Minetics forms a mineral layer into the metal substrate
• Helps prevent corrosion from occurring
• Helps stop existing corrosion from advancing
• Multi-use product great for CUI, piping systems, fittings, valves, tanks and vessels
• Low temperature service gel
• Non-drying compound
• Formulated to be applied to cold pipes very creamy
• For use on any system upto 250 deg F
• Ammonia, brine and glycol systems, LNG, cryogenic
• For weld packs on pre-insulated pipe systems
• Low pressure steam
• RG-2400 LT can be used in spray applications

Standards/Certifications: OSHA 29 CFR 1910.1200

• Installation Instructions https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST2400LT1PG_II.pdf
• SDS https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST2400LT1PG_SDS.pdf
• Specification Sheet https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/MAST2400LT1PG_SS.pdf