Design Polymerics DP-1030 Series Water Based Duct Sealant, Size: 1 gal, Color: White, Application: To Seal Joints on Metal, Flexible and Fiberglass Duct Board Supply and Return Air Duct, Temperature Rating: 40 to 110 deg F, Container Type: Pail, Form: Liquid, Odor: Mild Sweet, Cure Time: 24 to 72 hr, Specific Gravity: 1.3 to 1.5, pH Rating: 7.5 to 9, Boiling Point: 212 deg F, VOC: 0 g/L, Viscosity: 300000 to 400000 cPs, Shelf Life: 2 years, Coverage: 40 to 80 sq-ft at 20 to 40 Wet mil, Application Method: Brush, Caulk, Pump, Trowel
Application Method : Brush, Caulk, Pump, Trowel
Application : To Seal Joints on Metal, Flexible and Fiberglass Duct Board Supply and Return Air Duct
Boiling Point : 212 deg F
Color : White
Container Type : Pail
Coverage : 40 to 80 sq-ft at 20 to 40 Wet mil
Cure Time : 24 to 72 hr
Form : Liquid
Item Name : Duct Sealant
Odor : Mild Sweet
Series/Model : DP-1030
Shelf Life : 2 years
Size : 1 gal
Specific Gravity : 1.3 to 1.5
Temperature Rating : 40 to 110 deg F
Type/Style : Water Based
VOC : 0 g/L
Viscosity : 300000 to 400000 cPs
pH Rating : 7.5 to 9
A zero VOC, fiber reinforced, water based, UL listed, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1030 allows for easier sealing of holes and gaps often found in duct connections and duct joints. It exceeds all SMACNA seal and pressure classes and is recommended up to 15 in water gauge pressure.
- Excellent workability
- Crack and peel resistant
- Mold and mildew resistant
- Excellent dry adhesion and sag resistant
- Indoor or outdoor use
- Excellent water and UV resistance
- Sag resistant
- Paintable with latex or epoxy paints after cured
Standards/Certifications: ASTM E84|EPA Approved|FDA Approved|LEED V4 Certified|California Department of Public Health (CDPH) Emission Requirements and NFPA 90-A|NFPA 90B|UL 723|UL Listed|USDA Compliant
SDS
-
2" CHIPPER THROW AWAY PAINT BRUSH (36)
![NoImage]()
