piwik image

THERMON T99 HEAT TRANSFER CEMENT 1 GALLON (FORMERLY T63)

Cement

  • Manufacturer: Thermon
  • Brand: THERMON
  • DI Part #: CETHT991T
  • Manufacturer Part #: T-99-1

THERMON Heat Transfer Cement, Size: 1 gal, Color: Gray, Application: For Use in Heat Tracing and Various Other Applications to Aid in the Transfer of Heat, Temperature Rating: -320 to 1832 deg F, Container Type: Can, Form: Paste, Composition: 10 to 30% Sodium Silicate, 0.5 to 1% CI Pigment Black 26, Cure Time: 4 to 12 hr at 160 to 212 deg F, Specific Gravity: 1.68, Boiling Point: 214 to 216 deg F, Vapor Pressure: 156 mm Hg at 61.5 deg C, VOC: 0 %, Shelf Life: 1 year, Coverage: 64 sq-ft/gal

Application   : For Use in Heat Tracing and Various Other Applications to Aid in the Transfer of Heat

Boiling Point   : 214 to 216 deg F

Color   : Gray

Composition   : 10 to 30% Sodium Silicate, 0.5 to 1% CI Pigment Black 26

Container Type   : Can

Coverage   : 64 sq-ft/gal

Cure Time   : 4 to 12 hr at 160 to 212 deg F

Form   : Paste

Item Name   : Heat Transfer Cement

Shelf Life   : 1 year

Size   : 1 gal

Specific Gravity   : 1.68

Temperature Rating   : -320 to 1832 deg F

VOC   : 0 %

Vapor Pressure   : 156 mm Hg at 61.5 deg C

T-99 is a specialty high-temperature heat transfer compound formulated to provide exceptional thermal stability and superior bonding strength up to 1000 deg C. Unlike other grades of heat transfer compounds, it is also electrically non-conductive. It is supplied ready to use and may be applied by hand troweling to fill TFK channels. T-99 resists thermal and mechanical shock and provides an efficient heat transfer rate with a high bond strength. In order to promote good surface wetting and ensure contact, the surfaces of traced valves, pumps and other equipment must be prepared just as though a paint or primer is to be applied. Oil, grease, dirt, rust, scale, etc., must be removed. The use of solvents and emulsions along with scraping, chipping and wire brushing are common pre-treatment techniques for steel surfaces.

  • Thermally stable at continuous temperature exposures upto 1000 deg C
  • Electrically non-conductive
  • Exceptional bond strength to resist thermal expansion and contraction
  • High shock resistance when exposed to extensive thermal cycling
  • Fine grain size and smooth texture for ease in workability
  • Water soluble for easy clean up

Standards/Certifications: ASTM F1296|OSHA Compliant