THERMON T-3 HEAT TRACE CEMENT 1 GALLON

THERMON Heat Transfer Cement, Size: 1 gal, Color: Black, Application: For T-3 Heat Transfer Compound Creates an Efficient Thermal Bond Between A Steam or Electric Heater and Process Pipes or Equipment, Temperature Rating: -320 to 700 deg F, Container Type: Can, Form: Paste, Composition: 10 to 30% Sodium Silicate, 1 to 6% CI Pigment Black 26, Cure Time: 4 to 12 hr at 160 to 212 deg F, Specific Gravity: 1.68, pH Rating: 10 to 12, Boiling Point: 214 to 216 deg F, Vapor Pressure: 156 mm Hg at 61.5 deg C, VOC: 0 %, Shelf Life: 1 year, Coverage: 64 sq-ft/gal

Application   : For T-3 Heat Transfer Compound Creates an Efficient Thermal Bond Between A Steam or Electric Heater and Process Pipes or Equipment

Boiling Point   : 214 to 216 deg F

Color   : Black

Composition   : 10 to 30% Sodium Silicate, 1 to 6% CI Pigment Black 26

Container Type   : Can

Coverage   : 64 sq-ft/gal

Cure Time   : 4 to 12 hr at 160 to 212 deg F

Form   : Paste

Item Name   : Heat Transfer Cement

Shelf Life   : 1 year

Size   : 1 gal

Specific Gravity   : 1.68

Temperature Rating   : -320 to 700 deg F

VOC   : 0 %

Vapor Pressure   : 156 mm Hg at 61.5 deg C

pH Rating   : 10 to 12

T-3 heat transfer compound creates an efficient thermal bond between a steam or electric heater and process pipes or equipment. A single thermonized steam tracer utilizing Thermon's heat transfer compound is more cost effective than a contoured clamp-on jacket and has the equivalent performance of three or more bare tracers. T-3 is typically utilized for applications with maximum exposure temperatures of 371 deg C. To minimize waste and speed installation, use Thermon's ChannelTrace system featuring TFK channels. The ChannelTrace system provides protection prior to installation of thermal insulation and requires no special curing procedure for the T-3 heat transfer compound under the TFK channel.

• Increase heat transfer rates significantly over bare tracing, reducing number of tracers and steam traps
• Fewer steam tracers reduce installation time ChannelTrace eliminates waste
• Water soluble for easy clean up
• Requires no special curing procedure for tracing under TFK channels

Standards/Certifications: ASTM F1296|OSHA Compliant

• Catalog/Catalog Cut Sheet https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT31T_CAT.pdf
• Installation Instructions https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT31T_II.pdf
• SDS https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT31T_SDS.pdf
• Specification Sheet https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/CETHT31T_SS.pdf