POLYMER ADHESIVES AIR-LAG WATER BASED ADHESIVE (4)

Polymer Adhesives Air-Lag Lagging Adhesive, Size: 1 gal, Color: White, Application: Used to Seal Thermal Insulation or to Coat Exposed Edges of Fiberglass Insulation, Special Features: Water Based, Temperature Rating: 35 to 110 deg F, Container Type: Pail, Form: Liquid, Odor: Slight Ammonia, Composition: <3% Methyl Alcohol, <0.4% Ammonium Hydroxide, Cure Time: 12 hr, Specific Gravity: 1.25 to 1.35, pH Rating: 8 to 9.5, Boiling Point: 100 deg C, VOC: <3 %, Shelf Life: 18 months, Coverage: 100 sq-ft/gal

Application   : Used to Seal Thermal Insulation or to Coat Exposed Edges of Fiberglass Insulation

Boiling Point   : 100 deg C

Color   : White

Composition   : <3% Methyl Alcohol, <0.4% Ammonium Hydroxide

Container Type   : Pail

Coverage   : 100 sq-ft/gal

Cure Time   : 12 hr

Form   : Liquid

Item Name   : Lagging Adhesive

Odor   : Slight Ammonia

Shelf Life   : 18 months

Size   : 1 gal

Special Features   : Water Based

Specific Gravity   : 1.25 to 1.35

Sub Brand   : Air-Lag

Temperature Rating   : 35 to 110 deg F

VOC   : <3 %

pH Rating   : 8 to 9.5

• Excellent adhesion to lagging fabrics
• Edge coating for fiberglass duct liner tears
• Cures to a tough, flexible, water resistant film
• Engineered to handle extreme weather conditions
• A water based lagging adhesive used to seal thermal insulation or to coat exposed edges of fiberglass insulation

Standards/Certifications: LEED IEQ 4.1 Certified

• Catalog/Catalog Cut Sheet https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/MASTAL11P_CAT.pdf
• SDS https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/MASTAL11P_SDS.pdf
• Specification Sheet https://15000dii.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/MASTAL11P_SS.pdf