GLT Products Fiberglass Pipe and Tank Wrap, Insulation Thickness: 2 in, Material: Fiberglass, Facing Type: FSK, Length: 16 ft 8 in, Width: 36 in, Application: For Insulate Large Piping, and Other Curved Surfaces, Such as Pipes with Tracing Lines, Most Fittings and Other Irregular Shapes, Thermal Conductivity: 0.27 Btu-in/hr-sq-ft-deg F, Flame Spread Index: <=25, Smoke Developed Index: <=50
Application : For Insulate Large Piping, and Other Curved Surfaces, Such as Pipes with Tracing Lines, Most Fittings and Other Irregular Shapes
Facing Type : FSK
Flame Spread Index : <=25
Insulation Thickness : 2 in
Item Name : Fiberglass Pipe and Tank Wrap
Length : 16 ft 8 in
Material : Fiberglass
Smoke Developed Index : <=50
Thermal Conductivity : 0.27 Btu-in/hr-sq-ft-deg F
Width : 36 in
GLT Products fiberglass pipe and tank wrap is fabricated from semi rigid fiberglass with segmented sections designed to insulate large piping (over 8 in IPS) and curved surfaces. It is made with fibers perpendicular to the surface, and is available in ASJ or FSK facings and is suitable for installation over hot, cold, concealed and exposed piping systems.
- The orientation of the fibers gives the material the characteristics of a rigid board
- Pipe and tank insulation is shipped in a rolled form
- GLT Product fiberglass pipe and tank wraps can be applied with staples, mastic, tape or mechanical fasteners
- An added layer of protection can be achieved by adding metal jacketing which can be screwed or banded
- They are manufactured with the fibers perpendicular to the surface, which gives the material the characteristics of a rigid board
- Pipe and tank insulation can be applied using stainless steel banding or tie wire, CD weld pins or cuphead pins
Standards/Certifications: ASTM C612-93|ASTM C795-08|Federal Specification HH-I-558B|Federal Specification HH-B-100B
Specification Sheet
