Owens Corning Fiberglas™ Fiberglass Blanket, Insulation Thickness: 1 in, Material: Fiberglass, Length: 87 ft, Width: 48 in, Density: 1 pcf, Application: For Use in Metal Mesh Blankets and for Use on Boilers, Vessels and Many Other Types of Industrial Equipment Operating at Temperatures Upto 1000 deg F at Maximum Recommended Thickness, Also be Used in Panel Systems for Precipitators, Ducts and Breechings, Special Features: TIW 1, Temperature Rating: 1000 deg F, Thermal Conductivity: 0.26 to 1.06 Btu-in/hr-sq-ft-deg F
Application : For Use in Metal Mesh Blankets and for Use on Boilers, Vessels and Many Other Types of Industrial Equipment Operating at Temperatures Upto 1000 deg F at Maximum Recommended Thickness, Also be Used in Panel Systems for Precipitators, Ducts and Breechings
Density : 1 pcf
Insulation Thickness : 1 in
Item Name : Fiberglass Blanket
Length : 87 ft
Material : Fiberglass
Special Features : TIW 1
Sub Brand : Fiberglas
Temperature Rating : 1000 deg F
Thermal Conductivity : 0.26 to 1.06 Btu-in/hr-sq-ft-deg F
Width : 48 in
Fiberglas thermal insulating wool (TIW) Types I-HP insulations are off-white, noncombustible wool with resilient, inorganic glass fibers bonded with a thermosetting resin.
- Excellent thermal performance contributes to lower fuel costs due to reduced heat loss
- Easy-to-handle and install
- The insulation is easily impaled over welded studs or pins, or may be held in place with wire ties, metal lath or lagging
- There is no tendency for pin hole elongation under vibration situations, a frequent source of heat leaks in heavy products
- Large batts or blankets cover greater areas quickly, eliminating tedious block by block hand layup and drilling for studs in hard insulations
- Can be used in direct contact with steel, copper and aluminum without corrosive effects
Standards/Certifications: ASTM C553|ASTM C612|ASTM C795|CAN/CGSB 51.11 Type 1 Class 4|MIL-DTL-32585|MIL-I-22023D|Nuclear Regulatory Commission Guide 1.36|USCG 164.109
Catalog/Catalog Cut Sheet
