Aerocel Aeroseal LVOC™ Elastomeric Adhesive, Size: 1 gal, Color: Black, Density: 1.04 g/cc, Temperature Rating: -297 to 220 deg F, Form: Liquid, Odor: Pleasant to Pungent Ketone, Composition: 45 to 55% Acetone, 25 to 31% Methyl Acetate, 8 to 10% Synthetic Rubber, 6 to 8% Phenolic Resin, 1 to 3% Phenol, 1 to 2% Copolymer of Vinyl Acetate + Vinyl Chloride + Dicarbonic Acid, <0.8% Methanol, 0.7 to 0.8% Bisphenol A Epichlorohydrin Polymer, 0.2 to 0.5% o-Cresol, 0.1 to 0.2% Polymerized 1,2-Dihydro-2,2,4-Trimethylquinoline, Carbon Black, Cure Time: 24 to 36 hr, Specific Gravity: 0.863, Flash Point: 9 to 30 deg F, Boiling Point: 131 to 136 deg F, Melting Point: -106 to -97 deg F, Vapor Pressure: 241 hPa, Flammability Rating: 1.3% Lower, 12% Upper, Viscosity: 800 cPs, Shelf Life: 1 year, Coverage: 200 sq-ft/gal, Dry Time: 5 to 10 min
Boiling Point : 131 to 136 deg F
Color : Black
Composition : 45 to 55% Acetone, 25 to 31% Methyl Acetate, 8 to 10% Synthetic Rubber, 6 to 8% Phenolic Resin, 1 to 3% Phenol, 1 to 2% Copolymer of Vinyl Acetate + Vinyl Chloride + Dicarbonic Acid, <0.8% Methanol, 0.7 to 0.8% Bisphenol A Epichlorohydrin Polymer, 0.2 to 0.5% o-Cresol, 0.1 to 0.2% Polymerized 1,2-Dihydro-2,2,4-Trimethylquinoline, Carbon Black
Coverage : 200 sq-ft/gal
Cure Time : 24 to 36 hr
Density : 1.04 g/cc
Dry Time : 5 to 10 min
Flammability Rating : 1.3% Lower, 12% Upper
Flash Point : 9 to 30 deg F
Form : Liquid
Item Name : Elastomeric Adhesive
Melting Point : -106 to -97 deg F
Odor : Pleasant to Pungent Ketone
Shelf Life : 1 year
Size : 1 gal
Specific Gravity : 0.863
Sub Brand : Aeroseal LVOC
Temperature Rating : -297 to 220 deg F
Vapor Pressure : 241 hPa
Viscosity : 800 cPs
Aerocel Aeroseal LVOC adhesive is a synthetic rubber base contact adhesive formulated for bonding Aerocel insulating materials firmly together as well as bonding Aerocel insulation to other substrates. Aeroseal LVOC adhesive is specially formulated to meet the VOC content requirement of LEED for special purpose contact adhesives and SCAQMD Rule 1168. Bonding of non-rigid substrates that undergo dimensional changes in use is excellent with Aerocel Aeroseal LVOC adhesive. Aeroseal LVOC creates strong seams and butt joints that will operate at temperatures up to 300 deg F. Aeroseal LVOC may also be used for adhering sheet insulation to flat and curved surfaces that will operate at temperatures to 300 deg F. Aeroseal LVOC adhesive has a high moisture and water vapor resistance and weathering resistance to prevent moisture from penetrating joints, forming a permanent bond to the applied surface for long lasting service.
Standards/Certifications: LEED Certified
SDS
